Research Article

Wear studies on Al-Si automotive alloy under dry, fresh and used engine oil sliding environments

Akib Abdullah Khan, Mohammad Salim Kaiser

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2022.505ma0816

Research Article

Effect of addition of TiC nanoparticles on the tensile strength of Al7075-graphene hybrid composites

Lingaraju Sannananjapla Vageshappa, Mallikarjuna Channabasappa, Saleemsab Doddamani

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2022.486ma0725

Research Article

Short-term mechanical performance and flexural behavior of reinforced slag-fly ash-based geopolymer concrete beams in comparison to OPC-based concrete beams

P.N. Ojha, Brijesh Singh, Amit Trivedi, Pranay Singh, Abhishek Singh, Chirag Pede

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2022.515me0902

Research Article

Tensile and charpy impact properties of CNTs integrated PET/ Glass Fiber thermoplastic composites with commingled yarn

Özgür Demircan, Sarah Sufyan, Ahmed Mohamed Basem

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2022.442ma0606

Research Article

Investigation on the effect of ultra fine rice husk ash over slag based geopolymer concrete

A. Chithambar Ganesh, M. Vinod Kumar, K. Mukilan, A. Suresh Kumar, K. Arun Kumar

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2022.501ma0814

Research Article

Process parameter improvement for NITi's electrical discharge machining (EDM) process utilizing the TOPSIS approach

Atish Mane, Pradeep V. Jadhav

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2022.510ma0826

Research Article

Empirical equations for prediction of split tensile and flexural strength of high strength concrete including effect of steel fiber

P.N. Ojha, Brijesh Singh, Pranay Singh

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2022.475ma0715

Research Article

Optimization of hybrid fibre reinforced geopolymer concrete using hardened and durability properties

Kadarkarai Arunkumar, Arunachalam Sureshkumar, Arunasankar Chithambar Ganesh, Loganathan Parthiban, Premkumar V

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2022.450ma0620

Review Article

Optimistic and pessimistic impacts of COVID-19 scenario on waste management in developing nations: A review

Ismail Luhar, Salmabanu Luhar

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2022.428ma0415

Research Article

Performance study of aluminium oxide based nanorefrigerant in an air-conditioning system

Mohammed Dilawara, Adnan Qayoum

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2022.459ma0701

Research Article

Accuracy evaluation of the output of the spindle assembly of the NT-250I lathe machine

Sherali Yakhshiev, Ilkhom Egamberdiev, Akmal Mamadiyarov, Khisrav Ashurov, Nurbek Khamroev

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2022.523me0914

Technical Note

A Review of fatigue behaviour of resistance spot welds

Amruta Pasarkar, Atish Mane, Nilesh Singh, Avinash Datarkar, Nilesh Raut

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2022.509me0824tn

Research Article

Influence of time period and derivation of critical storey limit for RC frame buildings using construction sequence method of analysis

Nehal Mahadevbhai Desai, Sandip Vasanwala

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2022.414st0309

Research Article

Strength and durability assessment of laterized concrete made with recycled aggregates: A performance index approach

Chinwuba Arum, Stephen Adeyemi Alabi, Roland Chinwuba Arum

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2022.477st0716

Research Article

Mix ratio design assessment of interlocking paving stone using both destructive and non-destructive methods

Atoyebi O. D., Odeyemi S. O., Chiadighikaobi P. C., Gana A. J., Onyia S. C.

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2022.430st0420

Research Article

Fracture behavior of hybrid fiber reinforced normal strength and high strength concrete: comparison with plain and steel fiber reinforced concrete

P.N. Ojha, Pranay Singh, Brijesh Singh, Abhishek Singh

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2022.433me0515

Research Article

Performance analysis of lead rubber bearing isolation system for low, medium and high- rise RC buildings

Mrudula Madhukumar, Helen Santhi M, Vasugi V

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2022.437ie0526

Research Article

An experimental study on composite steel encased portal frame under cyclic loading

Sheeba Ebenezer J, Tensing D, Vincent Sam Jebadurai S

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2022.426ie0408

Research Article

Seismic performance analysis of RCC benchmark problem with magnetorheological dampe

Benita Merlin Isabella Kennedy, Joel Shelton Joseph, Arunraj Ebanesar, Daniel Cruze

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2022.435ie0521

Full Issue in single pdf file...

Previous Issue

Next Issue